HEATING PRODUCTS ON SALE

IN STOCK!

• Constructed of bronze ensuring durability and dependability
• Covered under PROFLO’s 1 year limited warranty
• High quality finish – will resist rust and corrosion through everyday use
• Connection Type: FIP x MIP
• For use on heating applications
• Operating Pressure: 15 psi WSP
• 60 psi non-shock, hot water straight valve
• Includes nut and tailpiece
• Steam straight valve

IN STOCK!

• End Connection: FIP x MIP
• For use on heating applications
• Phenolic bronze construction
• Includes nut and tailpiece
• Steam angle valve
• Max Pressure: 15 psi WSP
• 60 psi non-shock, hot water angle valve

IN STOCK!

The Spirovent VJR125TM Air Eliminator employs a patented Spirotube coalescing medium that “scrubs” the air from the system fluid. Simple to install with a straight in-line design it is available in the Junior Series for residential and light commercial applications from 1/2″ to 1-1/2″ pipe size. Solid brass construction, integral patented air release mechanism and a 20 year limited warranty. The Spirovent Air Eliminator is manufactured by Spirotherm and is designed for radiant heat and hydronic systems.

• Body Type: Brass
• Connection Type: Threaded

IN STOCK!

Pipe freeze protection for residential and manufactured housing. 9610 Application tape and elected traced labels. For attaching heating cable to pipe.

• 9610
• Raychem
• 715629000088

IN STOCK!

• Provides the specially designed plug you need to plug one Frostex heating cable into an electrical outlet
• The built-in power cord eliminates the need for extra heating cable from the pipe to the outlet
• The plug features a power indicating signal light for a fast indication that the Frostex heating cable has power applied

IN STOCK!

Raychem 777445-000 Frostex Self-Regulating Pipe Freeze Protection System – 120 Volt – 3W/Ft at 50F – 100 Foot Spool – Residential Grade Pipe Cable for Dry Areas Only – Requires 9800 Plug/End Seal Kit for Termination – 50 Foot Circuit Length Max

IN STOCK!

Universal Compatibility. Works with all probe and float type low water cut-offs. Digital Feed Counter – Brightly illuminated feed counter displays the amount of water added to the boiler Programmable. Feed Delay helps prevent flooded boilers. Allows time for condensate to return to the boiler before starting a feed cycle ensuring that additional water is needed.

IN STOCK

• Chrome-plated brass construction
• HVAC tool
• Used to open and close A957 hot-water air valves
• 7/32 in. square opening

IN STOCK!

• Use to seal and repair boilers, furnaces, flue pipes, stoves, ducts, kilns, chimneys, combustion chambers, and many other furnace and refractory applications. 
• Unique patented clean’n friendly formula meets OSHA’s requirement of less than 0.1% of crystalline silica content. 
• Can be used on oil, gas, coal, and wood-burning heating systems. 
• Adheres to most building materials. 
• When cured, makes positive non-porous fireproof seal. 
• Will not shrink, crack or crumble. 
• Contains no oils, asbestos, or crystalline silica. 
• Available in regular body (non-runny tan colored) cement, and heavy body (firmer consistency, dark gray color).

IN STOCK!

Non-toxic, odorless steam boiler cleaner contains fast-acting Trisodium Phosphate, TSP. Stops priming, surging in minutes. Removes rust, scale, oil, foam and impurities without draining or flushing system. Cleans pressure vessels, steam kettles, heat exchangers, steam generators and tanks. Safe to use on food service, process equipment and other sensitive, critical applications. When used on a regular basis, scout provides clean, dry steam along with improved boiler efficiency, fuel economy and heat transfer. Will not harm rubber or plastic components. Contains no petroleum distillates. NSF registered/USDA authorized.

IN STOCK!

The Hercules 30310 Boiler Solder is a reliable solution for repairing leaks in steam boilers. This one-pound powdered product effectively stops leaks from joints or cracks in both new and older installations. The non-metallic powder forms a durable seal that can withstand high pressure and temperature variations.

• Forms a strong seal for steam boiler repairs.
• Resists high pressure and temperature.
• Compatible with rubber and plastic components.

IN STOCK!

• 3/4″ Sweat Isolator Flange
• Forged brass body
• 600PSI Non-Shock WOG
• Blowout-proof stem, packing gland and O-ring stem seal
• Threaded end complies with ANSI B1.20.1

IN STOCK!

The 1″ PIPFM1-Press is a full port purge isolation pump valve which features a swivel flange and press end connections. This flanges allows for the installer to position the handle of the valve in an optimal orientation for use.